* Complete HHI Neck Rake kit to put a 23, 26 & 30 Inch, Wheel on your Bagger. Included is Weld on Rake Kit and Triple Tree $1190.00.

Stock tubes work with the 23" kit. Extended length fork tubes are required for the 26" and 30" kit.

Builders Kit Features  

• Mounting holes are present in our neck kit for the mounting bolts to attach the Fairing bracket on Roadglide models.

• The frame neck rake is 9 degrees on the 26" and 30" kit, 7 degrees on the 23" kit.

• Factory Triple Tree rake is 4 degrees. Our trees are a +8 over stock for the 30" kit for a total of 12 degrees, +5 degree over stock for the 26" kit for a total of 9 degrees and a, +3 over stock on the 23" kit for a total of 7 degrees.

• This kit can be installed with the motor in the frame (well protected during welding & painting of course). However, it doesn’t take much more to pull the motor allowing a full color match paint job on the frame.

• Using our kit the neck is extended 2” forward and 2” on the 30" and 26" kit. (The 23" kit extends 1" forward and 1" up.)

• The resultant trail will provide proper handling at both low and hi speed.

NOTE: A couple of other things to note for Roadglide models: The inner fairing mounting bracket will have to be modified & extended to allow adequate clearance for the triple trees.  In addition the engine guard will need to be replaced by a custom lower fairing support bracket.  We can help you with both of these items.  If you have any other questions let us know.

* HHI Neck Rake (No Triple Tree) $500.00 for 23 or 26 inch Wheel.

For more info call us at 248-892-1244 or email us at info@radicalbaggers.com